ADJ HYDRO BEAM X1, User Manual, Page: 10 / 42

10
• RISK GROUP 3 - RISK OF EXPOSURE TO ULTRAVIOLET (UV)
RADIATION!
• FIXTURE EMITS HIGH INTENSITY WAVELENGTH OF
ULTRAVIOLET LIGHT.
• WEAR PROPER EYE AND SKIN PROTECTION.
• DO NOT OPERATE FIXTURE WITH DAMAGED/MISSING
EXTERNAL COVER OR PROTECTIVE LENS.
• DO NOT LOOK DIRECTLY INTO THE (UV) LIGHT AND/OR VIEW
(UV) LIGHT DIRECTLY WITH OPTICAL INSTRUMENTS THAT
MAY CONCENTRATE THE LIGHT/RADIATION OUTPUT.
• AVOID PROLONGED PERIODS OF EXPOSURE.
• AVOID WEARING WHITE COLOR CLOTHING AND/OR USING
(UV) PAINTS ON SKIN.
• AVOID DIRECT EYE AND/OR SKIN EXPOSURE AT DISTANCES
SHORTER THAN 11 FEET (3.3 METERS).
• INDIVIDUALS SUFFERING FROM A RANGE OF EYE
CONDITIONS, SUNLIGHT EXPOSURE DISORDERS, OR
INDIVIDUALS USING PHOTOSENSITIVE MEDICATION
MAY EXPERIENCE DISCOMFORT IF EXPOSED TO THE
ULTRAVIOLET (UV) LIGHT EMITTED FROM THIS FIXTURE.
S A F E T Y G U I D E L I N E S
• DO NOT TOUCH the fixture housing during operation. Turn OFF the power and allow approxi-
mately 15 minutes for the fixture to cool down before servicing.
• DO NOT shake fixture, and avoid brute force when installing and/or operating fixture.
• DO NOT operate fixture if the power cord has become frayed, crimped, damaged and/or if any of
the power cord connectors are damaged and do not insert into the fixture securely with ease.
• NEVER force a power cord connector into the fixture. If the power cord or any of its connectors
are damaged, replace it immediately with a new one of the same power rating.
• DO NOT block any air ventilation slots, and do NOT allows them to be obstructed by dirt, dust, or
other debris. Allow approx. 7.9” (20cm) between the fixture and other devices or a wall for proper
cooling.
• When installing fixture in a suspended environment, always use mounting hardware that is no less
than M10 x 25 mm, and always attach an appropriately rated safety cable.
• ALWAYS disconnect fixture from main power source before performing any type of service and/or
cleaning procedure.
• Only handle the power cord by the plug end, and never pull out the plug by tugging the wire por-
tion of the cord.
• During the initial operation of this fixture, a light smoke or smell may emit from the interior of the
fixture. This is a normal process and is caused by excess paint in the interior of the casing burning
off from the heat associated with the lamp and will decrease gradually over time.
• Consistent operational breaks will ensure fixture will function properly for many years.
• ONLY use the original packaging and materials to transport the fixture in for service.