ADJ HYDRO BEAM X1, User Manual, Page: 20 / 42

20
I N S TA L L AT I O N
Screw one clamp via a M12 screw and nut into the Omega holder. Insert the quick-lock fasteners of
the Omega holder into the matching holes of the adjustable mounting bracket. Tighten the quick-lock
fasteners fully clockwise. Pull the safety-cable through the opening located on the bottom of the unit
and over the trussing system or a safe fixation spot. Insert the end in the carabine and tighten the
safety screw.
SAFETY CABLE:
ALWAYS ATTACH A SAFETY CABLE WHENEVER INSTALLING THIS FIXTURE IN A
SUSPENDED ENVIRONMENT TO ENSURE THAT THE FIXTURE WILL NOT FALL IF
THE CLAMP FAILS.
SAFETY CABLE
ATTACHMENT POINTS
SAFETY CABLE
CLAMP
OMEGA BRACKET
OMEGA BRACKET
ATTACHMENT POINTS