GB
02451
-
Edition
01
-
March
04
1/5
B 100
Alcatel Vacuum Technology France - ATH 200 User’s Manual
Safety instructions
• Our products are designed to comply with current EEC
regulations. Any modification of the product made by the user is
liable to lead non-compliance with the regulations, or even to put
into doubt the EMC (ElectroMagnetic Compatibility) performance
and safety of the product. ALCATEL declines any responsability for
such operations.
• The EMC performance of the product is obtained on the
condition that the installation complies with the EMC rules.
In particular, in disturbed environments, it is essential to:
- use shielded cables and connections for interfaces,
- stabilize the power supply line with meshing from the power
supply source to a distance of 3 m from the product inlet.
Risk of toppling: altough the products comply with ECC
regulations, it is important to take precautions to avoid
toppling during handling, installation and operation.
CAUTION
Certain detectors are fitted with oil pumps: the oil load
needed for pump operation is in separate cans. We also
recommend that the user drains the pump before re-shipping
the equipment.
CAUTION
Check the pumping conditions of the detector: the leak
detectors are not equipped for pre-pumping of corrosive
gases, condensable vapours of liquids, even in small
quantities.
CAUTION
When relevant, remove the protection which blocks the
outlet of the pump, on the rear of the leak detector. We
recommended connecting this outlet to a gas evacuation
circuit for the oil seal pump. This circuit should have as little
excess pressure as possible (less than 0.3 bar).
CAUTION
Storage of the equipment: our equipment can be stored
without special precautions for up to 3 months (room
temperature between 5°C and 40°C). For longer periods,
factors such as humidity content, temperature, salty
atmosphere, etc., can cause damage to certain «sensitive»
parts (elastomer seals, lubricant, etc.).
CAUTION
Generalities
Alcatel Vacuum Technology France - User's Manual ASM 182/192 TD+ - ASM 192 T2D+