User Guide | COMFORT SERENITY MQTT | NB-IoT / LTE-Cat-M1
48
Continues to measure temperature, relative humidity, CO2 concentration,
and VOC.
Continues to send protocol messages (such as Keep alive).
Takes this period into account for automatic calibration of the CO2 sensor.
Disables the LEDs corresponding to the CO2 level.
Disables the periodic transmission of temperature, relative humidity, CO2
concentration, and VOC values.
Does not allow manual calibration of the CO2 sensor.
The following table lists the parameters to be configured on the product to define a
blackout period.
Parameters
Description
Default Configuration
Main Functions Blackout
Period
Period during which the
product does not emit any
sensor values.
Disabled
Blackout Start Time
Start time of the blackout
period.
10 PM
📱
To configure a blackout period via the NFC IoT Configurator
application, go to the "CONFIGURATION" menu => Select the
"APPLICATION" section => Choose the "General" subsection =>
Configure the "Blackout Period of the main functions" and "Blackout Start
Time" => Apply the new configuration to the product via NFC.
5.4 Factory Reset
The COMFORT Serenity product can be restored to its default settings using the
NFC IoT Configurator application.
