User Guide | COMFORT SERENITY MQTT | NB-IoT / LTE-Cat-M1
32
8. Place the electronic card back into the front face of the casing
3. Close the casing
CAUTION
Make sure the product is in PARK mode when inserting or removing a SIM card.
Inserting or removing the SIM card with the product powered on can damage it.
📌
NOTE
Configuring a PIN code is not supported in the COMFORT Serenity
product.
4.4 Using the "Quick Start" Function
The NFC IoT Configurator app offers users a "Quick Start" function for the
COMFORT Serenity product, allowing them to configure the server URI, network
connection preferences, and initiate an automatic startup of the product (transition
from PARC mode to PRODUCTION mode) with just 3 clicks.
Once in PRODUCTION mode, the COMFORT Serenity product will communicate
with the MQTT broker, following its default application configuration:
Application parameters
Default configuration
Sensor Sampling Frequency
3600 sec
Transmission Frequency
3600 sec
Temporary Emission Suspension (blackout)
Disabled
Alarm Mode for High and/or Low Threshold
Detection for Temperature, Humidity, CO2,
and VOC
Disabled
Automatic CO2 Sensor Calibration
Enabled
Manual CO2 Sensor Calibration
Enabled
