ADENDORFF ZX6350G, Operation Manual

Page: 64 / 66

C. Simple R{Ile lbe same with: 2V-l\111L l\1S, 2V�J\1JIL_l\1)
Simple Arc R Calculation function:
One who is not quite at home in the concepts of plane coordinates will feel
difficult in using smooth arc function. If the arc lo be processed is simple enough,
and the required smootlmess is average, the simple arc R function may he a good
choice.
In general, the processing of a circular arc will be realized in one of the eight
ways shown below, using end mill or circular arc mill.
d
_ll
'
*The 01>erntion prncedure of the simple arc R function.
Let the tool face just at the arc, and key � , enter arc R Calculating function.
As to ho1v to let the tool face just at the start point, just refer to ( l) in page 30.
I. Select the simple R function (SIMPLE).
2. Select the processing way among the preset l to 8 ways, the prompt:
''WHICH".
28
C. Sintp1e R(De the sanie wilh: lV-i\1UL_I\lS-. 2V-i\111L_�I)
3. Select the processing plane, XY, XZ or YZ.
(ARC-XY)
(ARC-XZ)
(ARC-YZ)
4. Enter the of the circular arc (RDDIUS)
5. Enter the diameter of the tool (TI., DLA): When processing the arc in Planes XZ
and YZ, end mill is used and the processing in carried by the end edge
?f
the
tool so the diameter valve to be entered should be zero.(refer to step 5 m the
ope;ation procedure of the smooth R function).
6. Enter the maximal cut
(MAX
CUT): ,
VAX
When processing an arc Ill Planes XZ
�
"
1�··
and YZ, "MAX cur" in the simple R
,
i
function is defiu:d
:,s
tl�e d:pth _of cut
+·
4--
in each cut feed m Z axis direction
,
.....-
(see Fig. a) the maximal cut can be
- ··
changed during the processing.
Rg.
(a)
Rg. (b)
When processing an arc in plane XY,
"MAX CUT" is the cut of each cut feed and is uniform (refer to Frg. b ).
7. Implement the processing point by point following the �isplay.
<P
5
�''Y --·tt't-�·-
8. You may qnit the arc R Calculating
[])
y
function at will, just key�-
• ,
*Take tile processing of the arc on
A 8
right as au example.
t) At first, lei the tool face just at tire start point of
the arc (point A or Point B), key � ,
D5[1
rr.
]t1[
"'
1 p
ni
5lL1EJ"L
:
r1
E
enter ARC function.
[
JSlI1M!PIUEI
Select the simple f\mction key
lEJ .
·· ·
2) Select R processing mode.
Sta1i point is A, key
0-!El
[[filJHIIl[!Hj
End point is B, key�8
29
'.1
·1