ADENDORFF ZX6350G, Operation Manual

Page: 6 / 66

I USAG
The machine is used for cutting metals and nometals. It's suitable to
drill, mill, and widely use in the field of instrument, machining repairing for
cutting a single part or a batch of parts.
II USE AND MAINTENANCE
( Ref er to chart 1. )
1. The user must read the operation Manual carefully , know structure
and ability of every handle, the system of transmition and lubrication well.
2. Before operating, inspect the normal conditions of the column lock
handle, the spindle sleeve and electric equipments. The ground line must be
connect in the ground.
3. When the position of spindle Box to the working table need to be ad­
justed , two clamping shaft (j) locating on the right side of Hoist Descend
sliding must be lossed firstly, then tu1n the hoist - descend handle in front
of machine, to hoist or descend the working table to the idea position, finally
clamp the clamping shaft(D.
4. A micro - feeding institute is applied to the machine , before using,
pls tum the locking bolt@ in right side to form the handle body with micro
- gear, then tum the wheel @ in front of the head , the micro - feeding can
be realized.
5. The handle body must be seperated from micro - gear during drill-
ing , when drilling finished , loosen the handle @, the sleeve will reset auto­
matically, the elastic torce can be adjusted after loosing the screw locating
in the bottom of spindle Box and turning the spring to different position. The
spindle sleeve clamping handle @ should be clamped for milling. To obtain
the best effect, pls choose the 3 - blade vertical milling tool , at the most, the
-5-