,;
A WARNING
1. Read and understand the entire instruction manual before operating
machine.
2.
Always wear approved safety glasses/face shields while using this
machine .
3.
Make certain the machine is properly grounded.
4. Before operating the machine, remove tie, rings watches, other jewel-
ry, and roll up sleeves above the elbows. Remove all loose clothing and con-
fine long hair. Do Not wear gloves.
5. Keep the floor around the machine clean and free of scrap material ,
--....
oil and grease.
6.
Keep machine guards in place at all times when the machine is in
use. if removed for maintenance purposes , use extrme caution and replace
the guards immediate}.
7. Do NOT over reach. Maintain a balanced stance at all times so that
you do not fall or lean against blades or other moving parts.
8. Make all machine adjustments or maintenance with the machine un
i -
Summary of Contents for ZX6350G
