ADENDORFF ZX6350G, Operation Manual

Page: 53 / 66

A. Daslc Function
2, Press 12}---'),�to choose the 1st absolute zero of the raster ruler as the
mechanical origin.
! !,11]151
IZ/EIRI
. Move towards the positive direction of X axis of the
!
IR/EISIEIT/
/)(I
machme tool and search for the 1st absolute zero of the raster ruler as the
mechanical origin. After find the migin, then auto enter Ute next step for data input.
This time the X-axis displays the raster ruler fact value, and Y-axis displays the
former compensation value(if the readout is first compensated, the Y-axis display a
uncertain value).
6) Input the compensation setup of the 1 '' segment
At this time, firstly move the
I I I I 19)919151 0 I INIOI I I I 111
X-axis raster ruler towards the
I I I I 19)919151 [r]
positive direction. When the raster ruler is moved around the length of the
compensation value ( the compensation length in Step 4 is ±0.Smm) , the
display of Y axis is dimmed and enters into the status of value setting status,
at this time input the standard value of Y axis or the exact value measured by
laser (this method is implemented in every set-up point)
Press
�0----*�
(When press� ,
Y
-axis will displays the X-axis's value, and that means the
compensation value has been setup. If the value input is wrong, don't move the
raster ruler, and press
@:j
,then press
(El,
this time the digit-display LED of
Y
-axis will be in input state, and input the right value again.)
Press
(El
and enter into the next set-up point
coordin� value
7)
Remarks: In this function, the display of X
j
I / I / I / I I
lZJ
axis is the coordinate value, \Vhile Y axis
displays the standard value or the
measurement value by laser
1111111110
/
The standard value or the
measurement value by laser
Input the compensation setup of the 2nd segment
Press
(El,
enter into the next set-up point
10
r1 'I 'I �11
rn
1g1
rn
g@l
=
s1 0 I V1101 I I I 121
I 1 1 / 119)9@151 0
I
8)
9)
10)
A, Basic Function
Input the compensation setup of the 3rd segmenrt����
WBiOJDLlUJ 0 u11rn I I I I�
Press
0---),-��
I I I 13[Jj011111 f.v.l
Press
(El,
and enter into the next set-up point
Input the compensation setup of the 4th segment
rl
'I 'I =1g
rn
,a1�[!�[!"/I 0 I VJIOI I I I 1'11
Press
0---),-0---)>-�
I I I jl/[Jj0101 n 0
Press
(El,
and enter into the-next set-up point
Input the compensation setup of the 5th segment
,�,�,�,5-v-101�51�,, 0 I if/IOI I I I 151
Press
0---),-0---)>-�
I I I 15[11015111 0
Press
(El,
and enter into U1e next set-up point
11) Input the compensation selup of the 6th segment
·
r1 ·1 ·1 "16rnm=&
"'
[Jj 0 I Q1101 I I I 161
Press
0---)>-0---)>-!EJ
I I I 16006'01 0
After U1e selup is finished, press
ISJ
key to exit.
Remarks: Tite input zone for the compensation value of Y axis and Z axis is the
coordinate display zone of X axis.
2. The cancellation method of Segmented compensation value
Tite Segmented compensation value is only aimed at the digit dis?lay i_neter,
raster ruler and machine tool set up together. If the raster rule� o_r dtgt_t display
meter whose Segmented compensation value is set up in a maclnne tool is moved
to another machine tool, the Segmented compensation value needs to be reset.
When the Segmented compensation function is . not needed, the Segmented
compensation value is to be cancelled. The cancellatmn method IS:
According to the set-up method of Segmented com�ensati?n in�icated above,
when it is indicated to input Ute quantity of compensation pomts, mp�t .o. a� the
compensation segment, then all the compensation setup parameters are m1t1�lized.
At this time, all the compensation values set up before are cancelled automatically.
11
i
.
j