ADENDORFF ZX6350G, Operation Manual

Page: 11 / 66

VII ELECT C SYSTEM
1.
Electrical circuit abopt the advanced international component to
make up , which make the machine easy to operate and safe.
VIlI TRANSPO R T AND ATT.ENTION
1.
While transporting machine must be cafeful to carry and put down.
IX SIMPLE MALFUNCTION & O B VIA TI ON
1.
If the motor does not turn, please inspect it is right to connect wire
or check electrical source.
2. If the radialrunout of spindle is big with noise and heat, please in­
spect wether spindle is too loose.
pls spindle the nut on the spindle assembly to be fittest.
3. When machine wobble, pls cueck the motor mount and lever lock
nut screw, machine head surpor1 on the spindle, if loosing, pls adjust and
lock.
4. It is difficult for the spindle to rise, fall or not replacing, pls inspect
wether there is scrap iron and other something in the connection between
spindle sleeve and gear shaft and fati
gu
e of spindle. U finding them, pls
clean them and apply oil and adjust spring to fittest.
5. If the knee table slide carrige does not rise steadily with noise, the
table is steady, pls confirm wether wedge ship loose or not, and scrap iron.
add oil adjust wedge ship to fittest.
6. If there is noise in gear box , pls stop machine illlfllediately to con­
fonn the position you require, then check that the oil meet standard.
7. Prohibitted maintaining the machine with electric.
-
\()
-