– 34 –
Using The Keyswitch
General
Your system may be equipped with a keyswitch for use when arming
and disarming. A red and green light on the keyswitch plate indicate
the status of your system as follows:
Green Light: Lights when the system is disarmed and ready to
be armed (no open zones). If the system is disarmed
and the green light is off, it indicates the system is
not ready (one or more zones are open).
Red Light: Lights when system is armed or memory of alarm
exists.
Lit Steady: System is armed in AWAY mode.
Slow Flashing: System is armed in STAY mode.
Rapid Flashing: Memory of alarm, indicating an alarm has occurred .
Arming
To arm in the AWAY mode, turn
the key to the right for 1/2 second
and release. Keypads will beep twice
and the red light will stay on steady.
To arm in the STAY mode, turn
the key to the right and hold for
longer than 3 seconds, then release.
Keypads will beep three times and
the red light will flash slowly.
Disarming
To disarm the system, turn the
key to the right and release. If an
alarm has occurred, the red light
will be flashing rapidly (memory of
alarm).
GREEN
RED
