– 27 –
Bypassing Protection Zones
Using the 6 BYPASS Key
This key is used when you want to arm your system with one or more
zones intentionally unprotected. Bypassed zones are unprotected and
will not cause an alarm when violated while your system is armed. All
bypasses are removed when an OFF sequence (security code plus
OFF) is performed. Bypasses are also removed if the arming
procedure that follows the bypass command is not successful.
Note: The system will not allow fire or emergency zones to be
bypassed.
To bypass zones, the system must be disarmed first.
BYPASS
1. Enter your security code and press
6
.
2. Enter zone number(s) for the zones to be bypassed (e.g., 01, 02, 03,
etc.).
Important! All single-digit numbers must be preceded by a zero
(for example, enter 01 for zone 1).
3.
BYPASS 07 FRONT
UPSTAIRS BEDROOM
Typical bypass message
When finished, the keypad will display the
word BYPASS along with each bypassed
zone number. Wait for these zones to be
displayed before arming. Arming the
system before bypassed zones are
displayed eliminates all bypasses.
4.
DISARMED BYPASS
READY TO ARM
Arm the system as usual when the keypad
displays "ready" to arm message.
Quick Bypass
Your system allows you to easily bypass all open (faulted) zones
without having to enter zone numbers individually.
Note: All bypasses are removed when an OFF sequence (security code
plus OFF) is performed.
