ADEMCO VISTA-50P User Manual Download Page 61

Page: 61 / 76

– 61 –

Quick Guide To System Functions

FUNCTION

PROCEDURE

COMMENTS

Check Zones

Press [

✱

To view faulted zones when system not

ready.

Display All

Descriptors

Press and hold [

✱

] for 5

seconds.

Displays all alpha descriptors programmed

by installer.

Arm System

Enter code.
Press arming key

desired(AWAY, STAY,
INSTANT, MAXIMUM).

Arms system in mode selected.

Disarm System

Enter code.
Press OFF [1].

Disarms system and silences alarms.

Bypass zones

Enter code.
Press BYPASS [6].
Enter zone numbers to be

bypassed (use 2-digit entries).

Bypassed zones are unprotected and will

not cause an alarm if violated.

Quick Bypass

Enter code.
Press BYPASS [6].
Press [#].

Bypasses all faulted zones automatically.

Chime Mode

Enter code.
Press CHIME [9].

Keypad will sound if doors or windows are

violated while system disarmed.

Test Mode

Enter code.

Sounds alarm sounder and allows sensors

to be tested.

Press TEST [5]

View Messages

Press and hold [0] for at least 5

seconds.

Message from central station will appear.

View User

Capabilities

Enter user's code.
Press [

✱

] + [

✱

Displays partitions & authority levels

assigned to the user.

GOTO Partition

Enter security code.
Press [

✱

Enter partition number (1-8).
0 returns to default partition.

Allows a user at one keypad to perform

functions in another partition, if that user
is authorized to do so.

Add a User

Enter master/manager code.
Press CODE [8].
Enter new user's user number.
Enter code for that user.
At prompt, enter authority for

that user in this partition (1-5).

Follow prompts, 1=Yes, 0=No.

Master & Manager level users can add

users to the system, each with its own
code and authority level.

Summary of Contents for VISTA-50P













































































Search results

Summary of Contents for VISTA-50P

Reviews:

Related manuals for VISTA-50P

Brands by name

Popular brands

ADEMCO VISTA-50P, User Manual

Search results

Summary of Contents for VISTA-50P

Reviews:

Related manuals for VISTA-50P

Brands by name

Popular brands