Page 16
SYSTEM LAYOUT WORKSHEETS
As with any security system, you should first define the installation. This includes determining how many partitions
will be used, how many zones per partition, and how many users per partition. You will also need to determine what
peripheral devices will be needed, and basic system options such as exit/entry delays, etc. The control panel itself
should be located in an area that will facilitate wire runs to all partitions, and will allow access to power and
telephone circuits.
To help you layout a partitioned system, use the following worksheet. This will further
simplify the programming process.
P A R T I T I O N S
# of Users
Descriptor
Prim.
Sec.
Alpha Default Message
Partition #
(69 max.*)
(4 char max)
Sub. #
Sub. #
(32 character maximum)
Partition 1
Partition 2
Keyswitch Arming Partition Assignment (1-2):
Wireless Keypad Partition Assignment (1-2):
Use Partition Descriptor (yes/no)?
* At least one user is assigned per partition, regardless of whether or not that partition is actually used. A maximum
of 70 user codes can be programmed in the system.
COMMUNICATION OPTIONS BY PARTITION (enter yes/no)
O p t i o n
part 1
part. 2
Swinger Suppression Count
00-15; 00=no suppression
Cancel Report After Disarm
Dialer Reports for Panic (A or
✱
+ 1)
Dialer Reports for Panic (C or # + 3)
Dialer Reports for Panic (B or
✱
+ #)
Dialer Reports for Duress
Burglary Alarm Communications Delay
(16 sec.)
SYSTEM DEFINITIONS BY PARTITION (enter values or yes/no)
O p t i o n
part 1
part. 2
Entry Delay #1 (15-225 seconds):
Exit Delay #1 (15-225 seconds):
Entry Delay #2 (15-225 seconds):
Exit Delay #2 (15-225 seconds):
Quick Arming
Multiple Alarms per Arming
Keypad Panic for zone 95 (A or
✱
+ 1)
Keypad Panic for zone 96 (C or # + 3)
Keypad Panic for zone 99 (B or
✱
+ #)
Allow Sign-on (GOTO function)
Non-Bypassable Zone (can be any zone 1-64)
Sounder Timeout Duration (2 min. increments)
Keypad Annunciation During Entry**
Keypad Annunciation During Exit
Confirmation of Arming (ding)
Chime on External Siren
Access Control Relay (field 1
✱
76)
**no= 3 beeps
yes=continuous
