AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00
AddPac Technology Proprietary & Documentation
205 - 191
[Pin-Out of UTP Cable (RJ-45 to RJ-45)]
The RJ-45 to RJ-45 Ethernet cable is used to connect AP-VP150 to another device (typically
hub). The pin sequence of the RJ-45 connector is shown in Figure 7-1. For the signals and
specification, refer to Table 7-2, “Signals and Pin-Out of Serial Ethernet Cable”.
(Figure 6-1) 100Base-TX RJ-45 Connector
[Table 6-2] Signals and Pin-Out of Serial Ethernet Cable
RJ-45
Signal
Direction
RJ-45 Pin
1
Tx +
→
1
2
Tx -
→
2
3
Rx +
←
3
4
- -
4
5
- -
5
6
Rx -
←
6
7
- -
7
8
- -
8
•
This specification is about the serial cable that connects AP-VP150 to the hub.
•
Use a cross cable to connect AP-VP150 to either another AP-VP150 or a PC.
