AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00
AddPac Technology Proprietary & Documentation
205 - 183
* IP and Default Route Settings
VP150#
configure terminal
Enter configuration commands, one per line. End with CNTL/Z
VP150(config)#
interface fastethernet 0/0
→
Fast Ethernet Interface Port 0
VP150(config-if)#
ip address 172.20.103.1 255.255.0.0
→
IP Address Setting
VOIP_INTERFACE_DOWN
VOIP_INTERFACE_UP : (172.20.103.1)
VP150(config-if)#
exit
VP150(config)#
ip route 0.0.0.0 0.0.0.0 172.20.1.1
→
Default Route Setting
VP150(config)#
end
→
Go to General Mode
VP150#
VP150#
write
→
Save Settings
Proceed with write? [confirm]
→
OK
Building configuration...
[OK] Configuration saved to flash:/apos.cfg
* Once settings are complete, perform a ping test for the default router.
VP150#
ping 172.20.1.1
PING 172.20.1.1 (172.20.1.1): 56 data bytes
64 bytes from 172.20.1.1: icmp_seq=1 ttl=255 time = 0.49 ms
64 bytes from 172.20.1.1: icmp_seq=2 ttl=255 time = 0.43 ms
64 bytes from 172.20.1.1: icmp_seq=3 ttl=255 time = 0.44 ms
64 bytes from 172.20.1.1: icmp_seq=4 ttl=255 time = 0.44 ms
64 bytes from 172.20.1.1: icmp_seq=5 ttl=255 time = 0.44 ms
--- 172.20.1.1 ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 0.43/0.450/0.49 ms
If the result of the ping test is good, input in the console for making a call to a video phone is
complete.
