AP-VP150 Video Phone Installation and Operation Manual, Edition 1.00
AddPac Technology Proprietary & Documentation
205 - 25
The rear panel of AP-VP150 is described in [Table 1-4]:
[Table 2-5] Rear Panel of AP-VP150
No.
Display
Description
(1)
SW
This switch supplies the power to the system or blocks power supply.
(2)
DC 5V 5A
This port is used to connect an adapter for DC 5V 5A.
(3)
USB
This USB conforms to Standard 1.1. The maximum rate is 12Mbps, and
the user is connected to the USB memory.
(4)
LAN
This is Fast Ethernet interface of 10/100Mbps used for WAN (RJ45).
(5)
PC
This is Fast Ethernet interface of 10/100Mbps used for LAN (RJ45).
(6)
RS232C
This interface is used to control consoles and cameras for network
administration (RJ45).
(7)
AIN
This audio input interface for the output signal and connection of a
microphone or an acoustic device. Sets MIC and line in by using a
remote control.
(8)
AOUT
This is an audio output interface that connects an acoustic device such
as a headphone or a speaker. Sets a speaker and line out by using a
remote control.
(9)
VIN
This is an RCA composite video input interface that connects an
acoustic device such as cameras or DVD players.
(10)
VOUT
This is an RCA composite video output interface that connects an
analog video output device such as TV.
(11)
S-Video
This is an S-VHS video output interface that connects a high-definition
TV, a projector, and PDP.
(12)
PSTN
This is a 1-port PSTN backup interface that accommodates PSTN
C.O.lines.
