ADC MM702G, User Manual

Page: 132 / 168

Manage DSL
124 MM701G and MM702G User Manual
Test Bit Rate
Type 8 then select a rate (number 1 through 36 ) for the test bit rate. This test bit rate is
used by the manufacturer for internal use only.
SNR Margin Limit
Type
9
then enter a value from -64 to 63. This value indicates the minimum SNR
margin (in decibels) that must exist when the G.shdsl connection is synchronized and
in order for the DSL MAR LED to be lit ON Green. The default value is 4.
3 Type
10
to
Apply new configuration
for the G.shdsl settings.
View G.shdsl Configuration
You can view G.shdsl current settings from the
G.SHDSL Current Settings
dialog. See “Complete
an Advanced Configuration” on page 121 for definitions of these parameters that you
previously set.
From the
G.SHDSL Menu
, enter
1
to display the
G.SHDSL Current Setting
menu.