ADC MM702G, User Manual

Page: 120 / 168

Manage WAN Sessions
112 MM701G and MM702G User Manual
from the service provider via a DHCP server. If you enable DHCP client, leave the next
two fields, WAN IP address and WAN Network Mask, blank. These fields will
automatically receive values.
WAN IP Address
Type
10
then enter the IP address provided by the service provider for this session
unless you have enabled WAN DHCP. The default IP address is 0.0.0.0.
WAN Network Mask
Type 11 then enter the network mask provided by the service provider for this session
unless you have enabled WAN DHCP. The default WAN Network Mask is 0.0.0.0.
RIP Accept Mode
Type
12
then select one of the following:
•
1
—
No RIP
• 2 — RIP Version 1
• 3
—
RIP Version 2
• 4 — RIP Version 1 & 2 (default)
RIP Send Mode
Type 13 then select one of the following:
•
1 — No RIP
•
2 — RIP Version 1
• 3 — RIP Version 2 (default)
•
4 — RIP Version 1 & 2
2 Enter 14 to Apply new setting to add the new RFC1483 routed session to your session list.
Or, you can Enter 15 to Delete session .