ADC MM702G, User Manual

Page: 57 / 168

Chapter 5: Configuring System Parameters
MM701G and MM702G User Manual 49
2 To add a new SNMP community, do the following:
a On the SNMP Community List page, click Add a new community . The following dialog is
displayed.
b Enter the following information for the SNMP community.
Name
Identification for this SNMP community. All keyboard characters are allowed for
this name, up to a maximum of 80 characters. You must add a community name
in this field to later edit or delete the SNMP community. This name in the
SNMP
Community List table provides the link for editing or deleting the entry.
Access Privilege
The access allowed to this SNMP community. Accesses are either Read
(view-only access) or Write (full view and write access).
c Click Add . The new entry is added to and is displayed in the SNMP Community List table
(see page 48 ).