ADC MM702G, User Manual

Page: 68 / 168

Complete a DSL Advanced Configuration
60 MM701G and MM702G User Manual
C
OMPLETE A
DSL A
DVANCED
C
ONFIGURATION
Configure the G.shdsl parameters for the modem to facilitate it
synchronizing with either a DSLAM or another modem to which it
attaches.
1 Select DSL on the menu bar, then select Advance Configuration under [DSL Options] .
2 Configure the following parameters as directed by your service provider:
Operating Mode
When the modem is connected to a service provider through a DSLAM, the operating
mode is
Remote (default setting).
When two modems are used in a point-to-point application (LAN extension, for
example), one modem at the customer or user site is set to
Remote and the second
modem in the CO or wiring closet is set to Central-Office . For instruction on setting up
G.shdsl parameters and other related parameters for a point-to-point modem
application, go to
Chapter 7 , “Implementing a Point-to-Point LAN Extension.”
Standard Annex
Determines the transmission standards to which this G.shdsl connection will comply.
The Annex standard should be the same at both ends of the connection. Select one of
the following Annexes:
•
Annex-A
for operating conditions typically found in the North American
implementation of G.shdsl
Advance Configuration
DSL