ADC MM702G, User Manual

Page: 72 / 168

Complete a Quick Installation
64 MM701G and MM702G User Manual
C
OMPLETE A
Q
UICK
I
NSTALLATION
In a quick installation, you change configuration only for the Central-Office mode modem. The
Remote modem uses its factory default parameters. To set up the Central-Office modem, follow
the instructions in the following sections. The modems use a default bridging WAN session
(
RFC1483-bridged ) which has a predefined ATM connection using Virtual Path ID of 0 and
Virtual Channel ID of 35.
Configure for Central-Office Mode
1 Select
DSL
on the menu bar, then select
Advance Configuration
under
[DSL Options]
.
2 In the Operating Mode box, select Central-Office to set up this modem for this mode.
3 Click Apply .
The modem is shipped with factory defaults as a Remote modem and does not
require any additional configuration when used as a remote. Only the
Central-Office modem requires configuration changes.