Adaptec 5325301656 - Snap Server 14000 NAS Administrator'S Manual Download

Page: 44 / 224

NFS Access

Snap Server Administrator Guide

To access files on the server, double-click the icon for the share. A Finder window

will display the contents of the share, and your Snap Server will now behave like

any other disk on your Mac.

To disconnect from the Snap Server, drag its icon into the trash.

NFS Access

NFS access to the server is enabled on the

Network > NFS

screen of the

Administration Tool. By default, NFS access is enabled and any NFS client can

access the Snap Server through the guest account.

Note

Only NFS v2 and v3 are enabled by default. If you wish to enable NFS v4,

select the

Enable NFS v4

check box on the

Network > NFS

screen.

NFS client access to shares can be specified by navigating to the

Security > Shares

screen and clicking the name of a share, then clicking the

NFS Access

button. If you

are in Unicode mode, you must configure the Snap Server’s protocol for the code

page being used. See “NFS” on page 126 for more information.

Support for NFS

Consider the following technical information when configuring access for your NFS

clients.

Supported Protocols

Snap Servers support these versions of the NFS protocol:

* Kerberos-based security and NFS v4 ACLs are not supported in the GuardianOS

5.0 release.

Supported NFS Clients

Snap Servers have been tested with these UNIX-based networking clients:
• Red Hat Enterprise Linux (RHEL) 3.x, 4.x
• Red Hat Fedora 4.x, 5.x, 6.x, 7.x, 8.x
• HP-UX 11, AIX 4.3.3, 5.3

Protocol

Version

Source

NFS

2.0, 3.0, 4.0*

RFC 1094, RFC 1813

Mount

1.0, 2.0, 3.0

RFC 1094 Appendix A, RFC 1813

Lockd

1.0, 4.0

RFC 1094, RFC1813

Summary of Contents for 5325301656 - Snap Server 14000 NAS

































































































































































































































Search results

Summary of Contents for 5325301656 - Snap Server 14000 NAS

Reviews:

Related manuals for 5325301656 - Snap Server 14000 NAS

Brands by name

Popular brands

Adaptec 5325301656 - Snap Server 14000 NAS, Administrator'S Manual

Search results

Summary of Contents for 5325301656 - Snap Server 14000 NAS

Reviews:

Related manuals for 5325301656 - Snap Server 14000 NAS

Brands by name

Popular brands