manualshive.com logo in svg

Adaptec 5325301656 - Snap Server 14000 NAS, Administrator'S Manual

The Adaptec 5325301656 - Snap Server 14000 NAS is a powerful network attached storage solution. To maximize its capabilities, make sure you have the Administrator's Manual on hand. This manual is available for free download from our website, providing step-by-step instructions and essential troubleshooting tips.

Share
Download
background image

TCP/IP Options

22

Snap Server Administrator Guide

Failover

This mode uses the first Ethernet port as the primary network 
interface and the second Ethernet port is held in reserve as the 
backup interface. Redundant network interfaces ensure that an 
active port is available at all times. If the primary port 
(Ethernet1) fails due to a hardware or cable problem, the 
secondary port (Ethernet2) assumes its network identity. The 
two ports should be connected to different switches (though 
this is not required).

Note  

Failover mode does not provide switch fault tolerance.

Switch 
Trunking

This mode groups multiple physical Ethernet links to create 
one logical interface. Provides high fault tolerance and fast 
performance between switches, routers, and servers.

Link 
Aggregation 
(802.3ad)

Like Switch Trunking, this mode groups multiple physical 
Ethernet interfaces to create one logical interface, and 
provides high fault tolerance and fast performance between 
switches, routers, and servers.  Uses Link Aggregation Control 
Protocol (LACP), to autonegotiate trunk settings.

Enable 
Ethernet

Checked

By default, both Ethernet ports are enabled, whether they are 
used or not.

Unchecked

If the Ethernet2 port is not being used, it can be disabled by 
selecting the port and unchecking the Enable Ethernet 
checkbox. However, a bonded Ethernet port cannot be 
disabled, nor can a disabled Ethernet port be placed in bonded 
mode.

Note  

Ethernet1 must always be enabled. GuardianOS will not 

allow you to disable it.

Speed/
duplex

Auto

The default setting of 

Auto

 enables automatic negotiation of 

the speed and duplex settings based on the physical port 
connection to a switch. The speed setting establishes the rate 
of transmission and reception of data. The duplex setting 
allows the Ethernet port to transmit and receive network 
packets simultaneously.

Note  

Auto is the only allowable setting for a Gigabit port.

Fixed

The Snap Server may also be set to fixed speed/duplex 
setting: 10Mbps/half; 10Mbps/full; 100Mbps/half; 100Mbps/full

Note  

To prevent connectivity problems when changing to a 

fixed setting, see “Changing from Auto to a Fixed Setting” on 
page 24.

Option

Setting

Description

Summary of Contents for 5325301656 - Snap Server 14000 NAS

































































































































































































































Reviews:

No comments

Related manuals for 5325301656 - Snap Server 14000 NAS

Samsung HD080HJ - 80 GB Hard Drive User Manual preview
HD080HJ - 80 GB Hard Drive
Brand: Samsung Pages: 2
Samsung G2 PORTABLE HX-MU025DC User Manual preview
G2 PORTABLE HX-MU025DC
Brand: Samsung Pages: 36
V-Bro Products Garage Gator GGR125 Installation And Operating Instructions Manual preview
Garage Gator GGR125
Brand: V-Bro Products Pages: 17
3Com 3C13886 - Router OC-3 ATM SML Flexible Interface... Installation Manual preview
3C13886 - Router OC-3 ATM SML Flexible Interface...
Brand: 3Com Pages: 171
Radware APSolute Vision Installation And Maintenance Manual preview
APSolute Vision
Brand: Radware Pages: 81
U-Line H-6581 Quick Start Manual preview
H-6581
Brand: U-Line Pages: 2
E-Lins H900 Series Quick Start Manual preview
H900 Series
Brand: E-Lins Pages: 9
ZyXEL Communications NBG318S v2 Specifications preview
NBG318S v2
Brand: ZyXEL Communications Pages: 2
Seriallink SLK-R602 Series Manual preview
SLK-R602 Series
Brand: Seriallink Pages: 29
LaCie Biometric Hard Drive Quick Install Manual preview
Biometric Hard Drive
Brand: LaCie Pages: 44
Campbell SM192 Instruction Manual preview
SM192
Brand: Campbell Pages: 30
Comet Labs GS8+ User Manual preview
GS8+
Brand: Comet Labs Pages: 11
LaCie 12big Rack Spare Quick Install Manual preview
12big Rack Spare
Brand: LaCie Pages: 4
TAPKO SIMip Operating Instructions preview
SIMip
Brand: TAPKO Pages: 2
Planet VC-820M Quick Installation Manual preview
VC-820M
Brand: Planet Pages: 2
ST M29W128GH User Manual preview
M29W128GH
Brand: ST Pages: 9
TP-Link Archer AX10000 Quick Installation Manual preview
Archer AX10000
Brand: TP-Link Pages: 2
Supero SUPERSERVER 5015M-MF User Manual preview
SUPERSERVER 5015M-MF
Brand: Supero Pages: 120

Brands by name

Popular brands

Load more brands