manualshive.com logo in svg

Adaptec 5325301656 - Snap Server 14000 NAS, Administrator'S Manual

The Adaptec 5325301656 - Snap Server 14000 NAS is a powerful network attached storage solution. To maximize its capabilities, make sure you have the Administrator's Manual on hand. This manual is available for free download from our website, providing step-by-step instructions and essential troubleshooting tips.

Share
Download
background image

System Reset Options

178 Snap Server Administrator Guide

System Reset Options 

Often the first thing to try in resolving anomalous behavior on a Snap Server is to 

reset the server to factory defaults. This section provides information about the 

following ways to reinstall or reset the system defaults.
• Maintenance Mode
• Resetting the Snap Server to Factory Defaults
• Performing System Resets Without Network Access

Maintenance Mode

You will encounter the Snap Server maintenance mode when the GuardianOS has 

been compromised and is in need of repair or reinstallation. Maintenance mode 

consists of a series of HTML screens that allow you to perform the following 

functions:

• Upgrade/Repair — 

Either upgrades the GuardianOS from one version to 

another, or applies the GuardianOSImage

,

 but preserves system settings.

• Fresh install — 

Reinstalls the GuardianOS, overwriting any previous 

configurations and destroying all disk partitions.

Note  

To install the GuardianOS, you must obtain the appropriate 

GuardianOSImage file. This file is available from the user CD provided with your 

Snap Server, or has been provided as a download if you have upgraded to this 

release version.

Resetting the Snap Server to Factory Defaults   

The GuardianOS allows you to reset different components of the system. Default 

settings can be found in the default configuration sections of Chapters 2, 3, and 4 of 

this Guide.

Caution  

Each reset option requires a reboot of the server. To prevent possible data 

corruption or loss, make sure all users are disconnected from the Snap Server before 

proceeding.
Navigate to the 

Maintenance > Factory Defaults 

screen, select one of the following 

options, and then click 

OK

:

•

Reset Network Configuration To Factory Defaults

  Returns TCP/IP and other 

protocol settings to factory defaults. 

Summary of Contents for 5325301656 - Snap Server 14000 NAS

































































































































































































































Reviews:

No comments

Related manuals for 5325301656 - Snap Server 14000 NAS

IBM 8275-416 Quick Reference Card preview
8275-416
Brand: IBM Pages: 8
E-TOP BR486n User Manual preview
BR486n
Brand: E-TOP Pages: 76
Avaya 2N Helios IP Application Notes preview
2N Helios IP
Brand: Avaya Pages: 19
Overland Storage NEO 4000 Remove & Replace Instructions preview
NEO 4000
Brand: Overland Storage Pages: 6
FOR-A MFR-1616 Quick Start Manual preview
MFR-1616
Brand: FOR-A Pages: 2
Badger Basket 09071 Assembly Instructions Manual preview
09071
Brand: Badger Basket Pages: 6
QNAP TS-410E-8G User Manual preview
TS-410E-8G
Brand: QNAP Pages: 49
TYAN Transport GT26-B4987 Service Manual preview
Transport GT26-B4987
Brand: TYAN Pages: 125
IBM Netfinity 3500 Series Manual preview
Netfinity 3500 Series
Brand: IBM Pages: 152
Lantronix xPort Pro XPP1004000-02R Integration Manual preview
xPort Pro XPP1004000-02R
Brand: Lantronix Pages: 17
ZyXEL Communications NBG6616 Quick Start Manual preview
NBG6616
Brand: ZyXEL Communications Pages: 4
Nexsan sasbeast Quick Start Manual preview
sasbeast
Brand: Nexsan Pages: 6
Supermicro SUPERSERVER 1028UX-CR-LL1 User Manual preview
SUPERSERVER 1028UX-CR-LL1
Brand: Supermicro Pages: 128
Atop ABLELink GW21W User Manual preview
ABLELink GW21W
Brand: Atop Pages: 52
Belkin F5D7230au4P Manual preview
F5D7230au4P
Brand: Belkin Pages: 2
QUANTA QSSC-S99K 2U User Manual preview
QSSC-S99K 2U
Brand: QUANTA Pages: 177
D-Link DES-1026G Manual preview
DES-1026G
Brand: D-Link Pages: 16
Billion BiPAC 8200AXL-1200 User Manual preview
BiPAC 8200AXL-1200
Brand: Billion Pages: 94

Brands by name

Popular brands

Load more brands