Adaptec 5325301656 - Snap Server 14000 NAS Administrator'S Manual Download

Page: 119 / 224

Recovering the NetVault Database

Chapter 8 Disaster Recovery

105

Recovering the NetVault Database

This section summarizes the procedure necessary for recovering the NetVault

Database (NVDB) from tape. For instructional details, see the NetVault

documentation that shipped with your Snap Server.

Pre-Restore Requirements

Before restoring the database, perform the following steps on the Snap Server acting

as the NetVault Server:

Completely reinstall and configure the same version of the GuardianOS that the

server was running. The OS installation will also reinstall the NetVault Server

software.

If necessary, navigate to the

SnapExtensions

screen and re-enable the NetVault

software.

Remove all media from the device(s) used by the NetVault Server, except the

media that contains the backup saveset needed for the recovery of the NVDB.

Add all devices previously added to the NetVault Server through the use of the

Device Management window.

From the Device Management window, the media containing the backup saveset

will be recognized as FOREIGN in its designated drive or library slot. Scan the

media before proceeding with the restore operation.

Restore Recommendations

The following recommendations are offered for the process of recovering the

NVDB:

• Perform a Full Recovery of the NetVault Database —

Although NetVault offers

provisions for recovering individual elements of the NVDB, it is recommended

that a full recovery be performed. If recovering individual components, it is

strongly recommended that this be performed under the guidance of BakBone

Technical Support.

• Do Not Monitor Job Progress During a Recovery —

It is strongly recommended

that all NetVault windows be closed, and the NetVault GUI be closed during the

recovery of the NVDB, as this may interfere with the process.

Summary of Contents for 5325301656 - Snap Server 14000 NAS

































































































































































































































Search results

Summary of Contents for 5325301656 - Snap Server 14000 NAS

Reviews:

Related manuals for 5325301656 - Snap Server 14000 NAS

Brands by name

Popular brands

Adaptec 5325301656 - Snap Server 14000 NAS, Administrator'S Manual

Search results

Summary of Contents for 5325301656 - Snap Server 14000 NAS

Reviews:

Related manuals for 5325301656 - Snap Server 14000 NAS

Brands by name

Popular brands