Adaptec 5325301656 - Snap Server 14000 NAS, Administrator'S Manual

Page: 162 / 224

Off-the-Shelf Backup Solutions for the Snap Server
148 Snap Server Administrator Guide
10
Delete the client files you copied to the Snap Server because they are no longer
needed.
11
To verify the success of the installation, use your backup management software
to configure and run a test backup.
Backup and Restore Operations with the EMC Legato NetWorker Client
This section describes special procedures EMC Legato NetWorker users must use in
order to perform backup and restore operations on the Snap Server.
Add the Snap Server as a Root User
For backup operations, NetWorker requires that the Snap Server be configured as a
root user. To add the Snap Server root user as one of the administrators, use the
following procedure:
1
Open the NetWorker Administrator application.
2
Click the
Configuration
tab.
3
Click the
User Groups
menu item.
4
Click on the
Administrators
group.
5
In the Configuration box, add one of the following:
user=root@ hostname
where
hostname
is the host name of the Snap Server for each Snap Server.
Or, enter:
user=root
to add root for all Snap Servers.
6
Click
OK
.
Recover and Retrieve Operations
The EMC Legato NetWorker administrative interface does not support data
recovery operations from a remote client for a Linux-based operating system such
as the GuardianOS. To recover data, you must execute one of the following CLI
commands from a SSH client.
• Recover —
The
recover
command restores data from a normal backup job.
• Nsrretrieve —
The
retrieve
command restores data from an archive.
Use either the
recover
or the
retrieve
command exactly as described below. For
more details on these commands, see the EMC Legato Networker Command Reference .