3-4
Adaptec ATA RAID 1200A Installation and User’s Guide
■
JBOD (Volume)
—This option is recommended for high
capacity without redundancy or added performance features.
Requires at least two drives.
For more information about RAID levels, see
Supported RAID Levels
on page 1-5
.
Figure 3-3 RAID Array Modes
Array Name
This option allows you to specify an array name of eight characters
or less. If you don’t want to specify an array name, press Enter and
one will be automatically created.
Select Disk Drives
This option allows you to select the disk drives to be used with the
RAID array.
Block Size
This option allows you to select the block size of the RAID array.
There are three options: 16K, 32K, and 64K. The default block size
for RAID 0 is 64K. This option is available for selection for RAID 0
and RAID 0/1 only.
ATA RAID 1200A IUG.book Page 4 Wednesday, November 13, 2002 2:22 PM
