5-11
Using the Adaptec ATA RAID Management Software
6
Click OK. A message will be displayed for whichever
initialization option you choose:
■
Create only
All data on the selected disks will be deleted! Are you sure
you want to continue?
■
Create and duplicate
All data on the Source disk will be duplicated to the Target
disk. Are you sure you want to continue?
Click Yes to continue.
7
You will get a confirmation message notifying you that the
RAID you specified has been created successfully. You will be
prompted to restart your system. Click Yes to restart. After you
have restarted your system, the Main menu will display your
built arrays.
Create RAID 0/1 (Mirrored Striping)
To create a RAID 0/1 array, follow these steps:
1
From the Main menu Menu bar, select
Configuration>Create>RAID 0/1 (Mirrored Striping)
or, from the Main menu toolbar, select RAID 0/1.
2
Select the Block size from the Block Size screen. Specify an array
name of 8 characters or less. If you don’t specify an array name,
one will be automatically created. Click OK.
3
The following message appears:
All data on the selected disks of the array will be deleted! Are
you sure you want to continue?
Click Yes to create your array.
Note:
You must have four hard disk drives to create a
RAID 0/1 array.
4
You will be prompted to restart your system. Click Yes to
restart. After you have restarted your system, the Main menu
will display your built array.
ATA RAID 1200A IUG.book Page 11 Wednesday, November 13, 2002 2:22 PM
