3-5
Using the BIOS Array Configuration Utility
Start Creation Process
After you have made your selections, select this option and press
Enter
to start the creation process.
Note:
If you skip the Select Disk Drive option before selecting
the Start Creation process, you will get an error message at
the end of the creation process.
Start Creation With RAID 1
When you select the Start Creation option under RAID 1, you will
get a Process option sub-menu displaying the following options
(see
Figure 3-4
):
■
Create only
■
Create and duplicate
Figure 3-4 RAID 1 Options
Create only
This option allows you to create the array. When you select this
option, you will get a warning that all the data on the selected disks
will be deleted. Press Y to continue.
ATA RAID 1200A IUG.book Page 5 Wednesday, November 13, 2002 2:22 PM
