3-7
Using the BIOS Array Configuration Utility
Select Boot Disk
This option allows you to select the boot disk from among the hard
disk devices attached to the Adaptec ATA RAID 1200A card.
Warning:
If you create an array with your boot disk, you must
remove the boot mark before you can delete the RAID array.
Using the arrow keys, from the Main menu select Select Boot Disk
and press Enter. In Channel Status, select the drive you would like
to set as the bootable disk and press Enter. There will be an asterisk
in parentheses indicating that the disk drive selection has been
made. Reselection will erase the boot mark.
Note:
Your PC or server must be configured properly to use
the Adaptec ATA RAID 1200A card as the bootable
controller. The system will then use the bootable array as the
(fixed) boot
C
drive.
ATA RAID 1200A IUG.book Page 7 Wednesday, November 13, 2002 2:22 PM
