Adam Equipment PMB, Instruction Manual, Page: 8 / 84

󰀶 󰀶
| | P a g e P a g e © Adam Equipment Company 2010 © Adam Equipment Company 2010
3.2 3.2 ASSEMBLING ASSEMBLING THE THE ANALYZER ANALYZER
For best performance, let the analyzer warm up for 30 minutes before using. For best performance, let the analyzer warm up for 30 minutes before using.
 
Locate the PMB on a solid Locate the PMB on a solid
surface, free from vibration with surface, free from vibration with
good ventilation around it. good ventilation around it.
 
Place the lower reflector (1) Place the lower reflector (1)
into the base of the weighing into the base of the weighing
chamber
chamber
 
Gently place the pan support Gently place the pan support
(2) into the access hole. Rotate (2) into the access hole. Rotate
to position.
to position.
 
Place Place the the sample pan sample pan lifter (3) lifter (3)
into the weighing chamber, into the weighing chamber,
rotate so the tangs on the lifter
rotate so the tangs on the lifter
do not interfere with the pan
do not interfere with the pan
supports and the handle exits
supports and the handle exits
the chamber using one of the
the chamber using one of the
gaps in the cover.
gaps in the cover.
 
Place Place an an empty empty aluminium aluminium
weighing tray (4) on the pan weighing tray (4) on the pan
support support
 
Level Level the the PMB PMB using using the the
adjustable feet and spirit level adjustable feet and spirit level
For some applications For some applications it is desirable to run it is desirable to run the analyzer in the analyzer in a dummy a dummy run to run to
warm up the weighing chamber and the surrounding area before doing the warm up the weighing chamber and the surrounding area before doing the
actual test. See section
actual test. See section 14 14 for other ideas for other ideas to help ensure to help ensure accurate test accurate test
results. results.