Adam Equipment PMB, Instruction Manual, Page: 23 / 84

󰀲󰀱 󰀲󰀱
| | P a g e P a g e © Adam Equipment Company 2010 © Adam Equipment Company 2010
6.1.1 MANUALLY SETTING TEST PROCEDURES 6.1.1 MANUALLY SETTING TEST PROCEDURES
Press the Press the [Test/ [Test/
       
]] key key to to set set the the test test procedure. procedure. During During the the process process use use
the numeric entry procedure described in section 4.1 to enter or change a the numeric entry procedure described in section 4.1 to enter or change a
setting.
setting.
Pressing Pressing
[Print/ [Print/
 
   
 
]]
at any time during this procedure will print a list of the at any time during this procedure will print a list of the
current current settings. settings. See See 6.1.2 6.1.2
Pressing Pressing [[
       
0/T 0/T
       
/ Esc] / Esc] will always escape back to normal weighing without will always escape back to normal weighing without
a change to the parameter being displayed. Any parameter changed before a change to the parameter being displayed. Any parameter changed before
this time will be accepted.
this time will be accepted.
PROCEDURE PROCEDURE
Press Press
[Test/ [Test/
 
   
 
]]
to show to show “rESULt” with “rESULt” with the current the current setting displayed, setting displayed,
Options Options are are “Moisture”, “Moisture”, “Solid”, “Solid”, “ATRO “ATRO Moist”, Moist”, “ATRO “ATRO Solid” Solid”
Use arrow keys, Use arrow keys, [Dspl/ [Dspl/
       
]] and and [Test/ [Test/
       
]] ,, to change and press to change and press [Setup/Enter] [Setup/Enter]
to continue. to continue.
Heating Control, show “HEAt” Heating Control, show “HEAt”
Options Options are: are: “Single”, “Single”, “Ramp”, “Ramp”, “Step” “Step”
The next settings will depend upon which heating option was selected: The next settings will depend upon which heating option was selected:
“Single” Selected “Single” Selected
ATRO MOIST ATRO MOIST
result result
MOISTURE MOISTURE
result result
SINGLE SINGLE
Keat Keat