Adam Equipment PMB, Instruction Manual, Page: 49 / 84

󰀴󰀷 󰀴󰀷
| | P a g e P a g e © Adam Equipment Company 2010 © Adam Equipment Company 2010
10.1.3 CALIBRATION 10.1.3 CALIBRATION
This menu allows the user to calibrate the weight or the chamber This menu allows the user to calibrate the weight or the chamber
temperature.
temperature.
Press Press [Setup/Enter] [Setup/Enter] when “CALIBRATE” is displayed. when “CALIBRATE” is displayed.
The options for each parameter can be scrolled through by using the The options for each parameter can be scrolled through by using the
[Dspl/ [Dspl/
 
   
 
]]
or or
[Test/ [Test/
 
   
 
]]
key key
CAL CAL MASS MASS Begin Begin the the mass mass calibration calibration function. function.
Return to weighing when finished. Return to weighing when finished.
CAL CAL TEMP TEMP Begin Begin the the temperature temperature calibration calibration of of
the weighing chamber, Return to the weighing chamber, Return to
weighing when finished.
weighing when finished.
CAL CAL REPORT REPORT On On = = Enabled. Enabled. Prints Prints out out Calibration Calibration
report after successful calibration report after successful calibration
(either mass or temperature)
(either mass or temperature)
OFF = Disabled
OFF = Disabled
Press Press [PST/ [PST/
       
]] to advance to setting of the next menu which is to advance to setting of the next menu which is
“PASSCODES” or “PASSCODES” or [[
       
0/T 0/T
       
/ Esc] / Esc] to return to normal weighing. to return to normal weighing.
10.1.3.1 10.1.3.1 MASS MASS CALIBRATION CALIBRATION
Enter Enter the the menu menu for for Calibration Calibration section. section. Select Select CAL CAL MASS. MASS. Press Press
[Setup/Enter] [Setup/Enter] ..
Display will guide you through the steps. Display will guide you through the steps.
Display will show
Display will show “Load 0g” “Load 0g” , Unload , Unload the pan and the pan and remove the sample remove the sample pan. pan.
Press Press [Setup/Enter] [Setup/Enter] ..
The display The display will prompt will prompt to select the to select the mass to mass to be be used for used for calibration, calibration, i.e. i.e.
“LOAD “LOAD 50g”, 50g”, Use Use the the [Dspl/ [Dspl/         ] ] or or [Test/ [Test/         ]] keys to select the alternate keys to select the alternate