Adam Equipment PMB, Instruction Manual, Page: 56 / 84

󰀵󰀴 󰀵󰀴
| | P a g e P a g e © Adam Equipment Company 2010 © Adam Equipment Company 2010
Once the file has been saved the display will show Once the file has been saved the display will show
For 2 seconds then return to the USB display. For 2 seconds then return to the USB display.
To recall any stored test procedure press the To recall any stored test procedure press the
[Dspl/ [Dspl/
 
   
 
]]
key key to to show show the the
configuration configuration load load screen. screen.
Press the Press the
[Setup/Enter] [Setup/Enter]
key key to enter to enter the test load the test load function. function. The display The display will will
show the file name of the first file found. show the file name of the first file found.
To load this file press the To load this file press the [Setup/Enter] [Setup/Enter] key key again. again. Or to Or to choose a choose a different different
file press the file press the
[Dspl/ [Dspl/
 
   
 
]]
key to key to advance through advance through the other the other files available. files available.
To continue the USB device should be removed. the analyzer will return to To continue the USB device should be removed. the analyzer will return to
normal
normal weighing weighing automaticall automatically. y. Or Or press press the the
[[
 
   
 
0/T 0/T
 
   
 
/ Esc] / Esc]
key to escape key to escape
back to normal weighing. back to normal weighing.
To store or To store or recall other files recall other files plug the USB plug the USB memory back into memory back into the analyzer. the analyzer.
STORE OK STORE OK
USB USB
CONFIG LD CONFIG LD
USB USB
CONFIG LD CONFIG LD
USB USB
CONFIG1 CONFIG1
USB USB
CONFIG1 CONFIG1
LOAD LOAD