Adam Equipment PMB, Instruction Manual, Page: 22 / 84

󰀲󰀰 󰀲󰀰
| | P a g e P a g e © Adam Equipment Company 2010 © Adam Equipment Company 2010
End Point Determination (manual stop active in all tests) End Point Determination (manual stop active in all tests)
• •
Time, Time, Test Test ends ends at at the the end end of of a a preset preset time. time.
• •
Stable result, Stable result, test ends test ends if the if the results are results are stable within stable within a v a value set alue set by by the the
user. user.
• •
Time Time or or stable result, stable result, combines both combines both methods. Stop methods. Stop whichever occurs whichever occurs
first, a stable result or the end of a preset time. first, a stable result or the end of a preset time.
For timed test the user For timed test the user sets a time of sets a time of typically typically 5 minutes to 99 5 minutes to 99 minutes minutes
Set stable results criteria. The test will stop when the weight changes less Set stable results criteria. The test will stop when the weight changes less
than a preset amount in a preset time. The default setting is 0.002g in 15
than a preset amount in a preset time. The default setting is 0.002g in 15
seconds for PMB
seconds for PMB 53, 53, and 0.02g and 0.02g in 15 in 15 seconds for PMB seconds for PMB 202. The 202. The user can user can
set other values depending upon model. set other values depending upon model.
Start Criteria Start Criteria
• •
Start Start Manually Manually when when the the [Start] [Start] key is pressed key is pressed
• •
Start Start Automaticall Automatically y when when cover cover lowered. lowered.
Delays 5 seconds after cover is down before beginning. Delays 5 seconds after cover is down before beginning.
Print Print settings: settings:
To set if the analyzer should print and store results and when printing if the To set if the analyzer should print and store results and when printing if the
compete test results or only the summary is printed and stored in the
compete test results or only the summary is printed and stored in the
analyzers internal memory.
analyzers internal memory.
Default settings (stored in Default settings (stored in PST 00, PST 00, see section see section 6.3) 6.3) are: are:
% Moisture % Moisture
Single Temperature = 110ºC
Single Temperature = 110ºC
Rapid = Off
Rapid = Off
Interval Time = 5 seconds
Interval Time = 5 seconds
End Point Determination = Time and stable result
End Point Determination = Time and stable result
Time 60 minutes, and Time 60 minutes, and
Stable PMB 53 Stable PMB 53 = 0.002g/15 seconds or = 0.002g/15 seconds or Stable PMB 202 Stable PMB 202 = 0.02g/15 seconds = 0.02g/15 seconds
Start Criteria = manual start. Start Criteria = manual start.
Print Test = on
Print Test = on
Print Format = Complete
Print Format = Complete