|
|
P a g e
P a g e
© Adam Equipment Company 2010
© Adam Equipment Company 2010
10.1.4
PASSCODES
10.1.4
PASSCODES
To enable the security features in the PMB it is necessary to set passcodes.
To enable the security features in the PMB it is necessary to set passcodes.
There are 2 passcodes called Operator Passcode and Supervisor Passcode.
There are 2 passcodes called Operator Passcode and Supervisor Passcode.
The Operator Passcode allows an authorised user to operate the basic
The Operator Passcode allows an authorised user to operate the basic
weighing functions of the analyzer but will not allow access to the Supervisor
weighing functions of the analyzer but will not allow access to the Supervisor
Menus if the Supervisor Passcode has been set.
Menus if the Supervisor Passcode has been set.
To change or disable a Passcode it will be necessary to enter the current
To change or disable a Passcode it will be necessary to enter the current
passcode.
passcode.
Press
Press
[Setup/Enter]
[Setup/Enter]
when “PASSCODES” is displayed
when “PASSCODES” is displayed
to enter this section.
to enter this section.
OPERATOR
OPERATOR
Enter
Enter the
the current
current passcode
passcode (OLD)
(OLD) first
first then
then enter
enter a
a new
new
passcode
passcode if
if desired.
desired. A
A passcode set
passcode set to
to zero
zero will
will disable
disable
the security feature and allow unlimited access.
the security feature and allow unlimited access.
SUPERVISOR
SUPERVISOR
First
First enter
enter the
the current
current passcode
passcode (OLD)
(OLD) and
and then
then enter
enter a
a
new
new passcode if
passcode if desired.
desired. A
A passcode set
passcode set to
to zero
zero will
will
disable the security feature and allow unlimited access.
disable the security feature and allow unlimited access.
10.1.4.1
10.1.4.1
FORGOTTEN
FORGOTTEN PASSCODES
PASSCODES
Keep a record of the passcode to ensure you can access this section again.
Keep a record of the passcode to ensure you can access this section again.
If however you have forgotten your passcode you can still gain access by
If however you have forgotten your passcode you can still gain access by
entering a universal code.
entering a universal code.
If you have forgotten the current passcode a code of “15” will always allow
If you have forgotten the current passcode a code of “15” will always allow
you to enter the Supervisor area.
you to enter the Supervisor area.
Using the Supervisor menus go to the PASSCODE section and reset the
Using the Supervisor menus go to the PASSCODE section and reset the
operator or Supervisor passcode using the “15” code as the old number
operator or Supervisor passcode using the “15” code as the old number
when requested.
when requested.
Summary of Contents for PMB
