|
|
P a g e
P a g e
© Adam Equipment Company 2010
© Adam Equipment Company 2010
5.0 REAR
5.0 REAR
PANEL
PANEL
INTERFACES
INTERFACES
The rear panel has connectors for the data interface, fuse holder, security
The rear panel has connectors for the data interface, fuse holder, security
lock location and power supply input.
lock location and power supply input.
5.1
5.1
POWER
POWER
Make certain your PMB is compatible with the mains power supply in your
Make certain your PMB is compatible with the mains power supply in your
area. If
area. If the voltage is
the voltage is not the same
not the same the analyzer can
the analyzer can be damaged.
be damaged. Contact
Contact
your supplier if you require assistance.
your supplier if you require assistance.
The power
The power connection uses a
connection uses a standard IEC C13
standard IEC C13 socket
socket on the
on the cable with a
cable with a
plug
plug suitable
suitable for
for the
the location.
location.
Do
Do not
not use
use adaptors
adaptors if
if the
the plug
plug does
does not
not
match your power supply.
match your power supply.
The fuse should only be replaced with a time lag type fuse with high breaking
The fuse should only be replaced with a time lag type fuse with high breaking
capacity,
capacity, 5Amp
5Amp current
current rating.
rating. The
The fuse
fuse is
is a
a standard
standard 5
5 x
x 20mm
20mm size.
size. To
To
replace the fuse remove all power from the analyzer, unscrew the fuse holder
replace the fuse remove all power from the analyzer, unscrew the fuse holder
cover to ex
cover to extract the old fuse, replace with
tract the old fuse, replace with a new
a new fuse.
fuse. If the fuse should blow
If the fuse should blow
again, the analyzer must be serviced by a qualified service representative.
again, the analyzer must be serviced by a qualified service representative.
There
There are
are no
no user
user serviceable
serviceable parts inside.
parts inside. Contact y
Contact your
our supplier.
supplier.
5.2
DATA
5.2
DATA
INTERFACES
INTERFACES
The PMB has data interfaces for a variety of applications.
The PMB has data interfaces for a variety of applications.
The RS232 interface is a general purpose serial interface for communications
The RS232 interface is a general purpose serial interface for communications
with
with the
the analyzer,
analyzer, using
using a
a DE-9P
DE-9P type
type connector.
connector.
Refer
Refer to
to section
section 11.0
11.0 for
for
details of the
details of the interface.
interface.
Summary of Contents for PMB
