Adam Equipment PMB, Instruction Manual, Page: 61 / 84

󰀵󰀹 󰀵󰀹
| | P a g e P a g e © Adam Equipment Company 2010 © Adam Equipment Company 2010
After the test has finished the user can print either the complete test again or After the test has finished the user can print either the complete test again or
only a summary by pressing the
only a summary by pressing the
[Print/ [Print/
 
   
 
]]
key before returning to normal key before returning to normal
weighing. weighing.
The The complete report complete report is a is a copy copy of the of the data as data as shown above. shown above. If the If the summary summary
report is selected then the following is printed. Similar to the above except report is selected then the following is printed. Similar to the above except
without the interval readings.
without the interval readings.
MOISTURE TEST MOISTURE TEST
FILE NAME: RES00032
FILE NAME: RES00032
DATE:
13/12/2008 DATE: 13/12/2008
TIME: 09:38:07 TIME: 09:38:07
SER SER NO: NO: XXXXXXXXXXX XXXXXXXXXXX
USER USER NO: NO: XXXXXXXXXXX XXXXXXXXXXX
TEST TEST NO: NO: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Preset: Preset: PST PST 05 05
Bread-4 Bread-4
Result: Result: % % Moisture Moisture
Heating: Step Heating: Step
Temp: Temp: Step Step 1 1 120 120 C C
Time 1 04:00 Time 1 04:00
Step 2 110 C
Step 2 110 C
Time 2 90:00
Time 2 90:00
Rapid Manual Rapid Manual
Interval: Interval: 30 30 Sec Sec
Stop: Time/Stable Stop: Time/Stable
60 Min 60 Min
0.002 g
0.002 g
30 Sec
30 Sec
Start: Manual Start: Manual
INIT INIT MASS: MASS: 12.341 12.341 g g
*********** AUTO STOP *********** AUTO STOP *********** ***********
LAST LAST TEMP: TEMP: 111C 111C
TEST TEST TIME: TIME: 05:30 05:30 Min Min
FINAL FINAL MASS: MASS: 11.820 11.820 g g
MASS MASS LOSS: LOSS: 0.521 0.521 g g
RESULT: RESULT: 4.27 4.27 %M %M
Heading Heading
File name used by analyzer to store r
File name used by analyzer to store result esult
From From Analyz Analyzer er
Add serial number Add serial number
Add user number Add user number
Leave a blank line for users to fill in a number if Leave a blank line for users to fill in a number if
they wish, not from Analyzer memory
they wish, not from Analyzer memory
Settings of the test conditions
Settings of the test conditions
Measured Measured initial initial mass. mass.
TIME STOP if timed out or MAN STOP if user TIME STOP if timed out or MAN STOP if user
stopped
stopped
Summary of results Summary of results
Extra LF’s at end of the report Extra LF’s at end of the report