Adam Equipment NETS ME Price Manual Download Page 24 | Manualshive

Page: 24 / 96

background image

18

free.    With  that  in  mind,  please  make  sure  that  the  power  outlet  used
with the NETS is a dedicated line with no high-noise devices (such as
compressors,  motors,  etc.)  plugged  into  the  same  line.    Also,  make
sure  that  the  wiring  for  the  outlet  is  correct.    If  you  are  uncertain,
please contact a certified electrician or your local Dealer.

Be sure to check the NETS Specification Plate located on the left side
of the scale. The power supply specifications are listed there.

Quick Start

To get started immediately, follow the instructions in the “ACOM NETS
Quick Reference Guide” that is included with your scale. We still
recommend that you read this manual at least once. The Quick
Reference Guide states the following:

A. Basic setup:

1. Take the scale, pole display, platter, and accessories bag

out of the box.

2. Install the pole display: Note: Make certain that none of

the wires are being crimped when you are installing the
pole display.

a. Connect the display connectors together.
b. Place the Pole Display properly into the bracket

making sure that the connectors are slipped
inside of the pole (upwards.)

c. Attach the two display pole screws (2 larger

screws) to securely fasten the pole to the bracket.

d. Finally, attach the bracket-plate to the bracket

and fasten it with the 4 smaller screws.

3. Place the scale in the area where it will be used which

should  be  a  rigid  and  level  surface.    Using  the  leveling
feet and leveling gage, make sure that scale is level.  The
leveling gage is located on the right-side rear of the scale
by  the  pole  bracket;  the  leveling  feet  are  located  at  the
bottom  of  the  scale  chassis.    Note:    The  leveling  foot
located  on  the  front-right  side  of  the  bottom  of  the  scale
(closest to the numeric keypad) is not adjustable.  Please
do  not  try  to  adjust  this  leveling  foot;  instead,  use  the
other three feet to adjust the level.

«
...
22
23
24
25
26
...
»

Summary of Contents for NETS ME Price

































































































Reviews:

No comments

Related manuals for NETS ME Price

Brand: inventum Pages: 11

Brand: A&D Pages: 36

740-10-2 Series

Brand: Rice Lake Pages: 18

Brand: Oaxis Pages: 6

Brand: KERN Pages: 104

Brand: Fidelity Electronics Pages: 71

HEMA KS-123374.1

Brand: emerio Pages: 18

Brand: Measuretek Pages: 21

Detecto ProDoc BFA PD150

Brand: Cardinal Pages: 50

Brand: Tanita Pages: 46

Brand: Terraillon Pages: 28

Brand: Symmetry Pages: 32

Brand: Axis Pages: 60

Health o meter Professional 553KL-HR

Brand: Pelstar Pages: 4

Tri-Fitness Plus HealthStation SC-535

Brand: HoMedics Pages: 10

Brand: A&D Pages: 26

Brand: Avery Berkel Pages: 24

Brand: UWE Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands