56
<Picture 7-2 >
P7– 4. Set Peel off Sensor
Peel off sensor can be used to sense peel off the printed label.
You
can choose the way to enable the mode of peel off sensor work or
disable it.
To set Label Gap:
1. Follow steps 1 to 3 of entering Main Menu.
2.Press
7
4
.
4. Press
1
for “Disable” or
2
for “Enable”. The default
setting is 1.
4. Press
ESC
SET
to save the setting and return to the
Initial State.
P7– 5. Label Feed Adjustment (Label)
The LFA (Label Feed Adjustment) adjusts the print position of a label.
It is independent of the LFS number and can range from 0 to 40; 20
being the default value. The higher the number the lower things will
print on the label; the lower the number the higher things will print.
Length
Gap
Length
Summary of Contents for NETS ME Price
Page 1: ...Adam Equipment NETS ME Price Computing Scale Rev B May 2011 ...
Page 2: ......
Page 94: ...88 ...
