Adam Equipment NETS ME Price Manual Download Page 21 | Manualshive

Page: 21 / 96

background image

15

Location & Environment

This  scale  must  be  placed  on  a  flat  and  stable  surface.   Please  keep
the  scale  away  from  the  direct  path  of  ventilation  equipment,  strong
drafts, or direct sunlight.  These air disturbances can be picked up by
the scale’s sensitive weighing sensors and may cause incorrect weight
readings.

If the scale is not properly leveled, please adjust the 3 adjustable legs
at  the  bottom  of  the  scale.    DO  NOT  adjust  the  leg  that  is  under  the
printer and closest to the front of the scale.  Adjust the height of each
of  the  3  adjusting  feet  so  that  the  leveling  gauge  indicates  that  the
scale is level.  The leveling gauge is located to the right of the display
pole  bracket  on  the  rear  of  the  scale.    You  will  know  that  the  gauge
indicates “level” when the bubble is in the center of the marked circle.

Please avoid the following hostile environments:

Temperatures exceeding -10° C to 40° C (14° F to 104° F) .

Excessive vibration or instability.

Unstable or flimsy surfaces to use the scale on.

Dusty, dirty, or excessively wet environments of any kind.

The  scale  should  be  installed  in  a  dry  and  liquid  free  environment.
When the scale is installed in a high humidity or wet-type environment,
be  sure  to  avoid  spilling  or  spraying  anything  onto  the  scale.    If  you
must operate in this type of environment you MUST use the Spill-Proof
overlay  with  the  NETS.    You  can  get  this  optional  item  from  your
ACOM Dealer.  Failure to use this item may void your warrantee.

Maintenance

This scale’s exterior should be cleaned with a damp cloth or rag and a
mild  soap  solution.    Do  not  spray  any  liquids  directly  onto  the  NETS.
Always  spray  any  cleaning  fluids  onto  the  cloth  rag  you  are  using  to
wipe the scale.  Remember, NEVER to hose-down the scale.  Before
doing any type of cleaning, always make sure to turn the Power Switch
off and unplug the scale from any AC outlet.

«
...
19
20
21
22
23
...
»

Summary of Contents for NETS ME Price

































































































Reviews:

No comments

Related manuals for NETS ME Price

Brand: Tanita Pages: 40

TMC 0,3/0,6 KTPS/H1

Brand: RADWAG Pages: 28

Brand: ADE Pages: 15

Brand: Inscale Pages: 24

Brand: Vedia Pages: 9

Brand: Waeco Pages: 180

Brand: White and Brown Pages: 6

Brand: Muji Pages: 2

Brand: Jadever Pages: 16

Brand: Jadever Pages: 20

Brand: Jadever Pages: 28

Brand: Sapir Pages: 15

Brand: Breville Pages: 12

Brand: Terraillon Pages: 76

Brand: Beurer Pages: 122

Brand: OHAUS Pages: 2

Brand: OHAUS Pages: 22

Brand: OHAUS Pages: 34

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands