Adam Equipment NETS ME Price Manual Download Page 95 | Manualshive

Page: 95 / 96

background image

89

Manufacturer’s Declaration of Conformity

This product has been manufactured in accordance with the harmonised European

standards, following the provisions of the below stated directives:

Electro Magnetic Compatibility Directive 2004/108/EC

Low Voltage Directive 2006/95/EC

Adam Equipment Co. Ltd.

Bond Avenue, Denbigh East

Milton Keynes, MK1 1SW

United Kingdom

FCC COMPLIANCE

This equipment has been tested and found to comply with the limits for a Class A digital
device,  pursuant  to  Part  15  of  the  FCC  Rules.    These  limits  are  designed  to  provide
reasonable protection against harmful interference when the equipment is operated in a
commercial  environment.    The  equipment  generates,  uses,  and  can  radiate  radio
frequency  energy  and,  if  not  installed  and  used  in  accordance  with  the  instruction
manual,  may  cause  harmful  interference  to  radio  communications.    Operation  of  this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.

Shielded  interconnect  cables  must  be  employed  with  this  equipment  to  insure
compliance with the pertinent RF emission limits governing this device.

Changes or modifications not expressly approved by Adam Equipment could void  the
user's authority to operate the equipment.

WEEE COMPLIANCE

Any Electrical or Electronic Equipment (EEE) component or assembly of parts intended
to  be  incorporated  into  EEE  devices  as  defined  by  European  Directive  2002/95/EEC
must  be  recycled  or  disposed  using  techniques  that  do  not  introduce  hazardous
substances harmful to our health or the environment as listed in Directive 2002/95/EC
or amending legislation.  Battery disposal in Landfill Sites is more regulated since July
2002  by  regulation  9  of  the  Landfill  (England  and  Wales)  Regulations  2002  and
Hazardous  Waste  Regulations  2005.

Battery recycling has become topical and the

Waste Electrical and Electronic Equipment (WEEE

) Regulations are set to

«
...
93
94
95
96
»

Summary of Contents for NETS ME Price

































































































Reviews:

No comments

Related manuals for NETS ME Price

Brand: Salter Pages: 12

Brand: Jata hogar Pages: 16

Brand: Salter Pages: 16

Brand: J-Scale Pages: 2

Brand: Velleman Pages: 34

Victoria BM 708

Brand: ADE Pages: 44

Brand: RADWAG Pages: 20

Brand: OHAUS Pages: 22

Brand: OHAUS Pages: 40

Brand: Active Era Pages: 64

Brand: Active Era Pages: 104

Brand: Teesa Pages: 36

Brand: G&G Pages: 4

Brand: T Scale Pages: 8

Brand: Saturn Pages: 66

Brand: KOOGEEK Pages: 10

Brand: TECNA Pages: 28

Brand: Measuretek Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands