Acuity Brands | One Lithonia Way Conyers, GA 30012 | Phone: 800.535.2465 | www.nlightcontrols.com | © 2020 Acuity Brands Lighting, Inc. | All rights reserved. | Rev. 09/17/2020
1.
“Runs On” Section – Holds a summary of
when the schedule is scheduled to run on.
Tapping this section will walk through
selecting execution dates.
2.
Start Trigger Section – Holds a summary of
when and what the Start Trigger will be.
Tapping this section will walk through
selecting run time and actions.
3.
End Trigger Section – Holds a summary of
when and what the End Trigger will be.
Tapping this section will walk through
selecting run time and actions.
4.
Blink Warning – If enabled, a blink warning
to takes effect at the scheduled execution
of the End Trigger, and the End Trigger will
take effect 5 minutes after.
a.
The End Trigger must be
controlling channels to go 0%.
Tapping the “Runs On” allows the selection of dates and frequency the schedule should run
The “Runs On” screen allow the selection of days of the
week the schedule should execute.
•
Options: Monday through Sunday
•
Multiple days of the week can be selected
Schedule will run each year during the associated days of
week on the selected date range
