Acuity Brands | One Lithonia Way Conyers, GA 30012 | Phone: 800.535.2465 | www.nlightcontrols.com | © 2020 Acuity Brands Lighting, Inc. | All rights reserved. | Rev. 09/17/2020
Screen enables configuration of channels, or output
devices, to be controlled by the Trigger. A Trigger can only
control either Channels or Outputs.
1.
Channel/Device configuration section – Used to
enable the channels, or devices, to be controlled
by the Trigger.
o
Toggle button - Enabling will result
channel/device being controlled by this
Trigger.
o
Slider – Used to set the light level of the
channel/device.
2.
Channels Tab – Used to configure channels to be
associated to the Trigger.
o
Navigating out of this tab will result in loss
of configuration.
3.
Outputs Tab – Used to configure devices to be
associated with the Trigger.
o
Navigating out of this tab will result in loss
of configuration.
4.
Master Controller – Used to set light level of all
associated channels, or devices.
Screen introduces ability to enable, or disable, wall
switches from being used during execution of the
schedule.
•
Available options:
o
No Change – Maintains current switch
state
o
Disable – Disables switch from performing
local broadcast
o
Enable – Enables switch to perform local
broadcast
Switch Timeout – Used to adjust
timed override upon switch press
from blink warning
•
Default is 2-hours
