Simulators for Windows PCs | Simulator for Windows PCs
On screen keypad
The simulation software includes an on-screen keypad application.
This can be used to simulate the hard keys that are normally
available on the machine console. Pressing the buttons on the
keypad application will activate the same operation that would
occur when pressing the corresponding buttons on the machine
console.
The
Feed
slider allows a range of 1% - 150%. The
Speed
slider
allows a range of 30% to 130%.
The keypad application will automatically start and shutdown when
the control software is started and shutdown. If necessary, the
keypad application can be manually shutdown by clicking the red
"x" button in the top right corner of the keypad window. Likewise,
if necessary, the keypad application can be manually started using
the
Launch
button on the Keypad tab of the Control Panel window.
14
ACU-RITE | TURNPWR | User's Manual | 08/2020
187
Summary of Contents for TURNPWR
