Calculators | Geometry calculator
Listing
The geometry calculator listing contains all steps:
Limited to geometry steps: point, line, and arc.
No continuity indicator. Margin is used to display step number
for reference only, and has no incremental references. Use the
arrow keys for step selection.
To create a new Geo step:
Press the
POS
,
LINE
, or
ARC
key
To edit an existing Geo step:
Cursor to the step and press
ENTER
or
USE
To delete an existing Geo step:
Cursor to the step and press
CLEAR
Goto step number is supported.
Graphic window
The graphics window provides visual feedback:
Limited to 2D Line view
Extents determined by the size of the entered steps and
calculated results
The block size matches the extents plus the normal margin. The
datum symbol is displayed at (0,0). A ruler is also shown.
Highlight features:
Focus feature – Blue
Selected features – White
New features – Green
Normal features – Yellow
A GeoPoint is displayed as a crosshair (×)
Adding geometry features to the listing
Geometry steps are limited to
GEOPOINT
,
GEOLINE
, and
GEOARC
.
A new step is added by pressing the
POS
,
LINE
, or
ARC
key. As
with a part program, the new step is added before the currently
highlighted geo step.
GeoPoint
Defined by a single coordinate
GeoLine
Defined by combinations of From point, To point, and Angle
GeoArc
Defined by combinations of From point, To point, Center point,
3rd point, Radius, Direction, and Sweep Angle. From and To
points are optional (calculated at 3:00 position), otherwise,
combinations follow programmed arcs.
10
ACU-RITE | TURNPWR | User's Manual | 08/2020
165
Summary of Contents for TURNPWR
