Demonstration program | Programming
Programming a tool for recessing
Next, the o-ring grooves will be programmed. The grooves are
machined using a recess tool and recess steps.
Press the
TOOL
key to access the
Set Tool
dialogue
Press the
Tool Table
soft key to open the Tool Table
Select or define a recess tool with a width less than or equal to
the groove width
Press the
USE
key
The tool number and its dimensions and offsets will be
displayed in the
Set Tool
dialogue
Select
Forward
in the
Spindle
field
Enter
500
in the
Speed
field
Enter
2.00
in the
Tool Position:X
field
Enter
3.00
in the
Tool Position:Z
field
Press the
USE
key
Programming a recess
Press the
RECESS
key
Select
Recess
from the popup menu
Select
Turn
in the
Surface
field for a radial recess
Select
Perpendicular
in the
Direction
field for lateral machining
Using the numeric keypad, enter the following information:
Enter
0.25
in the
From:X1
field
Enter
-1.125
in the
From:Z1
field for the groove edge location
Enter
0.25 – 0.0625
in the
To:X2
field based on the groove
depth
Enter
-1.125 + 0.0625
in the
To:Z2
field based on the groove
width
Enter
0.125
in the
Cutting Depth
:
Pass
field for the depth per
plunge
Enter
0.1
in the
Clearance
field
Press the
USE
key
9
ACU-RITE | TURNPWR | User's Manual | 08/2020
151
Summary of Contents for TURNPWR
