
A
B
C
D
»
Rope Guide (A)
Check Rope Guide for obvious
damage, deformation or sharp
edges. Rope Guide should not be
bent and must
fi
t neatly with the
Rope Cover. Check wear indicator,
this should be completely intact
»
Rope Cover
Check the Rope Cover function by
opening and closing it. During closing
the Rope Cover must lock unhindered
into its position. Check the Rope
Cover further for deformation,
excessive wear or any sharp edges
»
Rope Wedge (B)
Check Rope Wedge for deformation
or any visible damage. The Rope
Wedge should be straight, sit just
above the bottom of the Rope Grab
and should not touch the ribs on
the inside of the Rope Grab
»
Rope Grab (C)
Check that Rope Grab is clean
and not
fi
lled with dirt, sand,
paint or any other foreign
material. Check the inside
for obvious damage, signs
of wear or sharp edges
»
Connection Sling
and Carabiner (D)
Check Connection Sling for
wear, discoloration or damage
such as cuts, abrasion and
contaminants (paint, glues,
chemicals). Take particular
note of the condition of the
Titanium Sling Bolt and
Carabiner Loop. Inspect the
carabiner for wear, damage
and deformation. Check that
the Carabiner opens and
locks correctly
Visual inspection of load-bearing parts
57
Summary of Contents for ACX
