ActSafe ACX, User Manual, Page: 38 / 80

The ACX Battery can be charged
at any charging level, no ‘memory
effect’ will occur. It is important
that the batteries are charged with
an original ActSafe ACX Charger.
The charging time is dependent
on the charging level of the Battery.
The maximum charging time is 80
minutes. During charging the current
charging level is displayed on the
Battery LEDs and the Battery is
fully charged when all 4 LEDs
are lit continuously.
Balancing:
After the Battery has been fully
charged, the BMS will start to
balance the Battery for another
10 minutes. Balancing is a process
where the Battery Management
System equalizes the charging
levels of all the cells in the Battery
Pack in order to optimize the lifetime
and performance of the Battery.
The Battery LEDs will slowly pulsate
after the balancing is complete.
1. Connect the Charger to mains supply.
2. Connect Battery to charger.
3. Constant charging controlled by
BMS. The Battery is full when all 4
Battery LEDs are continuously lit.
4. 10 minutes balancing and
all LEDs are lit continuously.
The LEDs slowly pulsate when
balancing is completed.
5. Disconnect Battery from charger.
6. Disconnect Charger from main supply.
Note
Charging must be carried out
in a dry area.
Disconnect the charger from the
power source when not in use.
CAUTION
Inspect before charging the
Battery, the Charger Cables
and the insulation on the socket
to avoid risk of electric shock.
DANGER
Do not touch the Battery
Charger during charging with
wet hands or disconnect the
plug by pulling the cord.
E.04 BATTERY CHARGING
38